Sunday, August 7, 2022

Laboratory Safety Measures

 


Laboratory Safety Measures 


Laboratory Safety Measures


ISO 9000 Quality Management System



Confined Space Entry Safety Procedure


Safety is very much important in the laboratory as many chemicals are handled/used.

Please look in to this general safety measures for laboratory and ensure the same.

1. No running or jumping, horseplay in a laboratory is permitted. Stored items or equipment shall not block access to the fire extinguisher(s), safety equipment, or other emergency items – Ensure free safe access. Stairways, hallways, passageways/aisles and access to emergency equipment and/or exits must be kept dry and unobstructed; i.e., no storage, no equipment, phone or other wiring. No combustible material such as paper, wooden boxes, pallets, etc., shall be stored under stairwells or in hallways. Hallways shall be kept free of boxes and materials so that exits and normal paths of travel are not blocked.

 

BASIC RIGGING SAFETY RULES


2. Eating or drinking within laboratories is not permitted. In all laboratories specific office areas may be designated for food in coordination with the Safety Committee Members. They must be physically separated from any laboratory operations. In the specified office areas no consumables, reagents or any tools should be shared with work areas. Ensure all chemicals are rightly labelled.

3. No food or beverage may be stored in the cold rooms/Laboratory refrigerators and freezers. Disposable water bottles not to be used.

4. Alone working - No employee shall work alone in a laboratory or chemical storage area.

 

HOT WORK RESPONSIBILITIES


5. Clothing worn in the laboratory should offer protection from splashes and spills, should be easily removable in case of an accident – PPE Matrix to be followed. Nonflammable, nonporous aprons offer the most satisfactory and the least expensive protection. Lab jackets or coats should have snap fasteners rather than buttons so that they can be readily removed. These coats are to be fastened closed while working and removed prior to exit from the laboratory. It is highly recommended that no sandals or open-toed shoes shall be worn by laboratory personnel in the laboratory. Laboratory clothing should be kept clean and replaced when necessary. it is required that lab coats, gloves, closed shoes and safety glasses are worn.

6. Pipetting by mouth is never allowed.

7. Aware about the emergency exits, emergency contact numbers, safe assembly points.


CHEMICAL SAFETY VIDEO IN HINDI | MSDS | SDS



Hazard Control




No comments:

Post a Comment

The Importance of Near-Miss Reporting

  The Importance of Near-Miss Reporting The Importance of Near-Miss Reporting In workplace safety, "near-misses" are close cal...