Sunday, September 18, 2022

GENERAL SAFETY RULES IN THE WORKPLACE | FACTORY SAFETY RULES

 


GENERAL SAFETY RULES IN THE

 WORKPLACE | FACTORY SAFETY RULES


GENERAL SAFETY RULES IN THE WORKPLACE | FACTORY SAFETY RULES


Safety Officer Interview Q & A



Electrical Extension Cord Safety


1. All employees shall follow the safe practices and rules and such other rules and practices communicated on the job. All employees shall report all unsafe conditions or practices to the proper authority.

2. Employees must know, understand, and practice the safety rules of the client.

3. The supervisor shall be responsible for implementing the safety practices by insisting that employees observe and obey all rules and regulations necessary to maintain a safe work place and safe work habits and practices.

4. All employees will attend all safety orientations, training, and weekly safety meetings that are sponsored, offered, or required by clients

5. When required, personnel will attend formal safety training such as breathing air equipment operations & maintenance, fire extinguisher operations, man lift operations, etc.

6. Good housekeeping must be practices at all times in the work area. Clean up all waste and eliminate any dangers in the work area.


Basics of Behavior Based Safety


7. Suitable clothing and footwear must be worn at all times.

8. Anyone under the influence of intoxicating liquor or drugs, including prescription drugs, which might impair motor skills and judgment, shall not be allowed on the job.

9. A face shield must be worn over safety glasses/goggles when installing nails with the pin gun.

10. Horseplay, scuffling, and other acts which tend to have an adverse influence on safety or wellbeing of other employees are prohibited.

11. Smoking is permitted only in areas designated as such by the client.

12. Firearms and other weapons are not permitted on any job site (including parking lots).


SUSPENDED SCAFFOLD SAFETY


13. Gambling or related paraphernalia is not permitted on any job site (including parking lots).

14. Do not enter any roped off or barricaded area unless authorized to do so.

15. Use only tools that are in a safe serviceable condition and use them only for the purpose they were designed.

16. Work shall be well planned and supervised to avoid injuries in the handling of heavy equipment.

17. No one shall be permitted to work while the employee’s ability or alertness is so impaired by fatigue, illness, or other causes that it might expose the employee or others to injury.

18. There will be no consumption of liquor or beer on the job.


Animation of Refinery Fire | CSB



Confined Space Entry Safety Procedure


19. Employees should be alert to see that all guards and other protective devices are in proper places and adjusted, and shall report deficiencies promptly to the supervisor.

20. Employees shall not handle or tamper with any electrical equipment, machinery, or air/water lines in a manner not within the scope of their duties, unless they have received specific instructions.

21. All injuries should be reported to the supervisor that arrangements can be made for medical or first aid treatment.

22. When lifting heavy objects, use the large muscles of the leg instead of the smaller muscles of the back.

23. Do not throw things, especially material and equipment. Dispose of all waste properly and carefully. Bend all exposed nails so they do not hurt anyone removing the waste.

24. Do operate mechanical equipment without prior training and obtaining a verification card.


WORK AT HEIGHT SAFETY MOMENT




No comments:

Post a Comment

The Importance of Near-Miss Reporting

  The Importance of Near-Miss Reporting The Importance of Near-Miss Reporting In workplace safety, "near-misses" are close cal...