MATERIAL STORAGE AND HANDLING SAFETY

 

MATERIAL STORAGE 

AND 

HANDLING SAFETY

PART 3 | HSE Interview Questions and Answers

SUSPENDED SCAFFOLD SAFETY

Stacking of materials must never be against the wall and should be well with in 3 meters height. At least 1.5 meters around the stacking must be kept clear for movement and inspection on regular basis.

Yellow line discipline to be adhered where ever applicable.

Ensure adequate fire fighting equipment are available in the storage area.

Adequate fire fighting equipment 's and water Hydrant system with Monitor to be installed in the storage area.

Maintain clean environment in the storage area and avoid Oil/Liquid spillage.

Chemicals and oils to be stored in the original containers and to be provided with secondary containment.

Authorized Operator only to operate Fork Lift  trucks.

Confined Space Entry Safety Procedure

To follow instructions as per Equipment manual for the storage

No one is permitted to sit on the fork lift truck other than the truck operator. To Drive at safe speed with caution.

Do not leave the Fork Lift Truck with engine on and do not load such that visibility is restricted.

Ensure proper Anchoring of the Load on Vehicles.

Avoid using Fork Lift truck where ever trolley can be used.

Use proper lifting tackles and associated tools and equipment such as Hoist, Chain Pulley blocks, Jacks etc., for handling heavy loads. Ensure such tools are certified by competent person.

Avoid swinging of Hoist chain with or without load and movement of personnel below the overhead load being carried. Avoid standing/resting below the suspended load.

Ensure the safe road access while carrying the load.

 

TRENCHES & EXCAVATIONS SAFETY

DON'Ts

Do not carry load without properly balancing it.

Don't carry load over persons and machines.

Don't allow load to remain suspended.

Don't overload the equipment beyond its capacity.

Don't allow more than one person to give signals.

Don't use the equipment for pulling the load.

Don't create jerk while transferring the load.

Don't ride on the load.

LIST OF NFPA CODES & STANDARDS – PART 2

BEST SAFETY POSTERS FOR WORKPLACE AWARENESS

HSE Jobs World - December 2021 ( 1 )

 

HSE Jobs World - December 2021 ( 1 )

SUSPENDED SCAFFOLD SAFETY

Are you looking for a permanent / fulltime / contracted health, safety and environmental (HSE) position within any industry?

On this page, you’ll find some HSE | EHS | SAFETY JOB | VACANCIES | HIRING | OPENINGS across the world…

Find health and safety jobs that you love in the health, safety, and environment field.

Your next role could be with one of these leading companies on our Health and Safety Job.

Apply today to find your next role in the health and safety field.

PART 2 | HSE Interview Questions and Answers

PNEUMATIC TOOL SAFETY TALK

Vacancy – HSE Engineer/officer (3 Months contract ) – URGENT Vacancies for one of our clients in Abu Dhabi
– Candidates must be inside UAE
– Candidates must be immediately available
– Candidates should have Oil and Gas Experience
Please send your CV to venolia@idcmps.ae

Hand and Power Tool Safety

Hiring: HSE Officer (Dubai, UAE)

Should have at least 5 years of experience in the same role
NERBOSH IGC certified
Experience in Building projects and hotels.
Can join immediately
must be inside UAE

Please send CV to noriel.banes@duncan-ross.com

TRENCHES & EXCAVATIONS SAFETY

Al Basti & Muktha LLC; A reputed Building Construction Company in Dubai has the below requirements:

● Project Managers.
● Construction Managers.
● Planning Engineers.
● QA QC Engineers.
● Safety Officers.
● Land Surveyors.
● Site Engineers.
● Junior Engineers.

Candidates with relevant experience in high raise tower and luxury apartment projects in Reputed companies can forward their CVs to:

naveenp@abmgroup.ae

• PS: Since 99 percent working class population speak Hindi, the position is limited to Indians.
Apologies. Candidates who are locally available will only need to apply.

BEST SAFETY POSTERS FOR WORKPLACE AWARENESS

Hi Dear,
We are looking for candidates with min. 5 years experiences in Oil & Gas and available to work in Tangguh, Papua Barat, ASAP for following position:
1. Piping Supervisor
2. HSSE Engineer
May you have any interest or if you have some recommendation, please to share the application to adi.gunawan@tripatra.com

BHOPAL GAS TRAGEDY | DISASTER - DOCUMENTARY

WORK AT HEIGHT PRECAUTIONS - 

PICTORIAL TRAINING

Responsibilities for a HSE | Safety Professionals typically include:

As a HSE Professional, you will be tasked with:

Ensuring the safety of all employees across the organization providing strategic health and safety support to all employees and including all contractors employees.

Developing, updating, maintaining and documenting safety standards, instructions, and codes inline with the national / international guidelines.

Developing and delivering training programmes to ensure all employees understand their responsibilities in maintaining a safe work environment in the industry.

Conducting risk assessment and reviewing, supporting for compliance with both company and industry standards.

Guiding/advising on crisis management responses to emergency situations and incidents either during or after regular duty hours

 

 Confined Space Entry Safety Procedure

Essential skills required for HSE | Safety Professionals :

Good analytical thinker with strong problem-solving skills.

Observant with great attention to detail and organisational skills.

Ability to work under tough situations, pressure and meet tight deadlines independently and as part of a team.

Have to stay up-to-date with changes in the law and technological advancements in the HSE field.

Capable to explain scientific or technical information in simple terms to wider teams.

Confidence in making right decisions.

Good commanding communication skill.

Tactful and able to get on well with people from all backgrounds and professionals from other disciplines and with shop floor employees to top management.

CRANE OPERATIONS - GENERAL SAFETY TIPS

 

BASIC DRIVING SAFETY TIPS

 

BASIC DRIVING SAFETY TIPS

NAPO IN SAFETY VIDEO - SAFE MOVES

HSE Interview Questions & Answers

BASIC DRIVING SAFETY TIPS

 

Preparation for the Drive:

Get a tire pressure gauge and know the correct tire pressures for each type of vehicle. 

 

1. Inspect your vehicle every day before each driving. Check for lubrication oil, tire pressure, engine oil, and radiant water.

Clean windows, headlights, tail lights and windscreen etc for the better vision and clear indication.

 

2. Tire pressures must be set to the manufacturers recommended pressures. Do not reduce tire pressure to compensate for ambient temperature. If you have to reduce tire pressure to travel through soft sand area, re-inflate when you get back on the graveled or asphalted road. Soft tire flexes more than correctly inflated tires and generates higher tire wall temperature, which can lead to puncture or tire burst. 

 

Confined Space Entry Safety Procedure

3. Obey the speed limits on streets as well as on the highways and inside the plant or site premises.

 

4. Do not violate signal lights. It is against traffic regulations.

 

5. Do not exceed the speed limit. Remember it takes longer to stop on sandy road or on graveled road than that on dry pavement. 

 

6. Always wear your seat belt. A seat belt can save your life and prevent serious injuries. Ensure all the other passengers also worn the seat belt.

 

7. Do not attempt to overtake on a single-track road where you cannot see enough clearance ahead to allow safe passage. 

 

BASIC RIGGING SAFETY RULES

8. Do not cause other vehicle to alter the course or speed.

 

9. Do not make third lane on double track road.

 

10. Check side view mirrors and shoulder before attempting to change the lane. 

Give signals whenever intend to change the lane or where it can help the other road users. Signaling do not give you privilege to change the lane without ensuring the safety of fellow Road users. 

11. Do not use cell phone while driving. Do not engage yourself in other activities like eating food, adjusting the music systems etc while driving.

 

12. Respect other vehicles and pedestrian on the road.

TRENCHES & EXCAVATIONS SAFETY