Saturday, August 21, 2021

Hand and Power Tool Safety | Safety Talk | Toolbox Talk

 


Hand and Power Tool Safety | Safety Talk | 

Toolbox Talk  


NAPO SAFE MAINTENANCE


Often times we overlook the hazards associated with the common tools that are used on a daily basis. With this safety talk we hope to bring some awareness to the potential hazards of these common hand and power tools and how to minimize these hazards.

Training Requirement in common hand and power tools:

Each employee using hand and portable power tools must receive initial training and an periodic refresher training.

 

Pre Inspection Use (to be done before every use):

Damaged or cracked housing, power source , or bits/accessories

Dull blades are often more dangerous than sharp blades

Missing guards or protective devices

Leaking gasoline, oil or other fluids

Tool appears to be in poor condition

Does the tool have a 3wire cord, if not is it double insulated?

Ensure area is free of any potential trip hazards

Do not underestimate the importance of a clean work area

 

SCISSOR LIFT SAFETY TIPS


Proper Usage instructions for common Hand & Power Tools:

Ensure you are wearing the correct PPE in correct method

You should always wear eye protection

Use the right tool for the job

Follow the manufacturer’s instructions

If unsure about use, ask a supervisor or coworker for clarification

Insure tools are not pointed at or operated in close proximity to other individuals

Use spark resistant tools when working near a fuel source

Do not use excessive force to cut/drill through hard materials

Gasoline/Mixed Fuel Powered Tools must be off and cool when re-fueled, use only in well ventilated areas.

If you need to use a gas/mixed fuel powered tool indoors please contact HSE department prior to use.

 

Basic Scaffold Safety


Storage Instructions:

Drain fluids (gasoline)if equipment will be in storage for an extended period of time

De-energize tool prior to storage (includes removing air pressure, hydraulic pressure and removing loads).

Store electric tools in dry areas

Store flammables in accordance with applicable local regulations

 

Group Discussions with the Working Team Members:

Has anyone in the group been injured by a power tool or had a close call/nearmiss? How could this injury have been prevented.

What tools present the greatest hazard in your work environment? How can you minimize these risks?

Are there any tools that need to be repaired or discarded? If so take time to do this immediately after the talk.

Hand and Power Tool Safety | Safety Talk | Toolbox Talk  

 

 FORKLIFT SAFETY



 

 

1 comment:

The Importance of Near-Miss Reporting

  The Importance of Near-Miss Reporting The Importance of Near-Miss Reporting In workplace safety, "near-misses" are close cal...