\
Working Safely with Crane
BEST SAFETY POSTERS FOR WORKPLACE AWARENESS
Crane accidents are one of the leading causes of death
and injury in the construction industry today. Fatalities and serious injuries
can occur if cranes are not inspected and used properly. Many fatalities can
occur when the crane boom, load line or load contact power lines and
electrically energize the equipment. Other incidents happen when workers are
struck by the load, are caught inside the swing radius, or fail to assemble/
disassemble the crane properly. Use safe work practices to help reduce
accidents when working with or around this potentially dangerous equipment.
SAFETY INDUCTION IN HINDI - SAFETY IN CONSTRUCTION / INDUSTRY
Make sure the crane is on a firm/stable surface
and level.
Inspect cranes, rigging and hoists before use to see that all
components, such as wire rope, lifting hooks, chains, etc., are in good
condition.
Fully extend outriggers and barricade
accessible areas inside the crane's swing radius.
Watch for overhead electric power lines and
maintain a safe working clearance from lines.
Use the correct load chart for the crane's current configuration and setup, the load weight and lift path.
Do not exceed the load chart capacity while making lifts.
Do not move loads over workers.
Be sure to follow signals and manufacturer instructions while
operating crane.
No comments:
Post a Comment