Working Safely with Crane

 \

Working Safely with Crane

BEST SAFETY POSTERS FOR WORKPLACE AWARENESS

Crane accidents are one of the leading causes of death and injury in the construction industry today. Fatalities and serious injuries can occur if cranes are not inspected and used properly. Many fatalities can occur when the crane boom, load line or load contact power lines and electrically energize the equipment. Other incidents happen when workers are struck by the load, are caught inside the swing radius, or fail to assemble/ disassemble the crane properly. Use safe work practices to help reduce accidents when working with or around this potentially dangerous equipment.

SAFETY INDUCTION IN HINDI - SAFETY IN CONSTRUCTION / INDUSTRY

Make sure the crane is on a firm/stable surface and level.

Inspect cranes, rigging and hoists before use to see that all components, such as wire rope, lifting hooks, chains, etc., are in good condition.

Fully extend outriggers and barricade accessible areas inside the crane's swing radius.

Watch for overhead electric power lines and maintain a safe working clearance from lines.

Use the correct load chart for the crane's current configuration and setup, the load weight and lift path.

Do not exceed the load chart capacity while making lifts.

Do not move loads over workers.

Be sure to follow signals and manufacturer instructions while operating crane.

Scaffold : Over Head Hazard

Scaffold : Over Head Hazard

 

Scaffold : Over Head Hazard

TBT on Compressed Gas Cylinders

Workers on scaffolds risk injury from overhead hazards such as falling tools, equipment, and materials and energized overhead power lines. To protect employees from falling objects and electrical shock, take these precautions:

 

Install overhead protection when there is risk of exposure to falling objects. Types of overhead protection include toe-boards at edges of platforms, screens, guardrails, debris nets, catch platforms, canopy structures

 

Designate a fall zone under scaffolding with barricades or danger tape to protect employees working below scaffolds

 

EYE INJURIES & EYE PROTECTION / PPE

Keep scaffolds 10 feet or more from power lines, unless you verify the power lines are de-energized

Secure tools and equipment so that they don't become falling objects

 

Always wear approved head and foot protection when working on or around scaffolds

 

Inspect all scaffolds prior to use or at least on a daily basis

 

When stacking materials above toe-boards either secure and / or use a screen

 

Pay attention to material handling while working on scaffolding to avoid contact with energized power lines

 

 THE BEST INDUSTRIAL SAFETY POSTERS - 2

 

July2021 Jobs (02) :HSE - UAE, Document Controller (HSE) – QATAR, QHSE Officer – UAE

 

July2021 Jobs (02) :HSE - UAE,  

Document Controller (HSE) – QATAR, 

QHSE Officer – UAE

THE BEST INDUSTRIAL SAFETY POSTERS - 2

HSE - UAE

Hello! I am searching for the following experienced profiles to start working in a project in UAE. Suitable candidates need to have previous experience working for service companies.

HSE Administrators (focus on: reporting / statics / document administration)
HSE Training Coordinator
HSE Trainer
Environmental Coordinator
HSE Coordinator
HSE Supervisor

Rotation: 90/21
Working days/hours: 6 days per week and 10 hours per day

If interersted please send your CV, availability and salary expectation to irada.demirtash@competentia.com

PIPER ALPHA DISASTER DOCUMENTARY

HSE OFFFICER 

HSE officer with transferable Iqama


HSE officer with relevant
experience in refinery and petrochemical industry construction/maintenance jobs.
Must have experience working in GCC countries.

Only transferable iqama and profession in iqama must be safety officer need to apply.

Send your cv to projects@alamarainternational.com

TBT on Compressed Gas Cylinders

Document Controller (HSE) - QATAR

Hiring is ON.... Check below position and apply if interested.
 
Job details:
 
Company: NAFFCO Qatar Factory
Work Location: Qatar
Contact: recruitment@qatarfactory.qa
 
Available positions:
 
* HR Secretary
* Estimation Engineer (Electrical)
* Draftsman (Mechanical/Electrical)
* Planning Engineer
* Quantity Surveyor
* Document Controller (HSE)
* HVAC Engineer
 
Interested candidate please send your CV here: recruitment@qatarfactory.qa
 
Note: Please give the subject as Position name (above mentioned) while sending the application.

PASS METHOD OF FIRE EXTINGUISHER USAGE

QHSE Officer - UAE

Urgently looking to hire the below positions for a Leading Catering Company Based in UAE
1)QHSE Officer
(Minimum of 4 years UAE experience in Food Industry)
2) Cost Accountant
(Minimum of 5 years UAE experience in General Accounting and Cost Accounting in the production/manufacturing/Catering Industry)

3) Catering Manager
(Minimum of 4 years UAE experience in Catering Industry)

Interested candidates kindly share CV to info@electrahrc.ae

WORK AT HEIGHT PRECAUTIONS - 

PICTORIAL TRAINING

TBT on Compressed Gas Cylinders

 

TBT on Compressed Gas Cylinders

Compressed gas cylinders can be hazardous. Sudden release of the gas can cause a cylinder to become a missile-like projectile, destroying everything in its path. To prevent such a dangerous situation, follow procedures for safe handling:

PASS METHOD OF FIRE EXTINGUISHER USAGE

. Store cylinders in an area specifically designated for that purpose. 

Ensure that the area is well ventilated, away from sources of heat, and protect cylinders from being struck by another object.

. Do not drop cylinders or allow them to fall. Secure them in an upright position during use and storage,

. Move cylinders with a compressed gas cylinder cart designed for that purpose.

. When moving a cylinder, even for a short distance, ensure that all the valves are closed, the regulator is removed, and the valve cap is installed.

RISK MANAGEMENT / ASSESSMENT

. Do not remove a cylinder cap until the cylinder is secured in place and ready to use. 

Cylinder caps protect the valve on the top of the cylinder from damage if it is knocked over. 

Also, if gas is accidentally released through the valve, the cap will vent the gas out of both sides, minimizing the likelihood that the cylinder will topple.

. Before using the gas, install the proper pressure-reducing regulator on the valve and verify that the regulator is working, that all gauges are operating correctly, and that all connections are tight to ensure that there are no leaks.

. When you are ready to use the gas, open the valve with your hands. 

Never use a wrench or other tool. If you cannot open it with your hands, do not use it.

FORKLIFT SAFETY

July2021 Jobs (01) : HSE Officer, Safety Engineer – DUBAI, UAE

 

July2021 Jobs (01) : HSE Officer, 

Safety Engineer – DUBAI, UAE

PASS METHOD OF FIRE EXTINGUISHER USAGE

HSE OFFICER - DUBAI

Position : #hseofficer
Salary : 6000-7000 AED
Gender : Any
Location: #dubai
Experience: Minimum 2 years of experience in Food Industry.
Must be Degree holder with complete Nebosh Certificate
Must be fluent in English
Must be available in UAE to join immediately 
 
Nationality: Any
Industry: #catering

To apply email to jobs@rightvows.com

WORK AT HEIGHT SAFETY TRAINING

EHS OFFICER - UAE

( #UAE #HSE )
Looking for EHS Officer for NAFFCO with RSP (SARS, CSP or Grad IOSH) certificate. Oil & Gas experience min 5 years is a must. Must be available immediately . Salary 8000-10000 AED.
Prefer candidate currently available in UAE.
Please send CV to saifkhan.khan@naffco.com

WORK AT HEIGHT PRECAUTIONS - 

PICTORIAL TRAINING

HSE OFFICER - UAE

( #UAE #HSE )
HSE Officers required for our construction company immediately. Relevant industry Experience - 2 years min.
NEBOSH and Engineering qualification is must.

Enoc experience will be an advantage.
Accommodation and Transportation facility provided by the company.

Candidates available in UAE will be preferred.

interested candidates send CVs to
Gincosafety@gmail.com

FORKLIFT SAFETY

Safety Engineer/Safety Officer - UAE

Requirement for immediate joining
as a Safety Engineer/Safety Officer with Engineering Background .

Requirements:

[ ]Thorough knowledge and understanding of HSE principles, and practices.
[ ] NEBOSH/IOSH qualified
[ ] Fluent in English language (oral and written)/Hindi(Oral).
[ ] Ability to multi task, prioritize and manage time efficiently.
[ ] Contracting company experience would be added advantage.
[ ] Salary will be discussed during face to face interview.
[ ] 1-3 years U.A.E. experience would be considered as ideal experience

Interested candidates can send their CV's to hr@loyalgroup.ae

BEST SAFETY POSTERS FOR WORKPLACE AWARENESS